Synergis Cloud Link (2024)

FAQs

What is a synergis cloud link? ›

Synergis Cloud Link connects seamlessly to Synergis IP access control system, providing real-time monitoring of events and alarms, advanced cardholder and visitor management, and comprehensive reporting.

Synergis™ Cloud Link includes four CODE DIP switches on the front of the appliance. They allow you to run command codes, which can apply certain configurations and reset settings. By turning the four CODE DIP switches ON or OFF, you can apply a configuration to the Synergis™ Cloud Link appliance.

Note: You can click Configure to change the settings of the UniFi Cloud Key. The default login is ubnt/ubnt. After the UniFi Setup Wizard is finished, the UniFi Controller management interface will appear.

Hostname of the Synergis Cloud Link unit. The default hostname is the letters "SCL" followed by the unit's MAC address. The MAC address is the first address on the label sticker on the unit. For example, if the label says 0010F32CF482 , then the default hostname is SCL0010F32CF482 .

Use the default IP address ( 192.168. 0.251 ) and credentials ( admin/password ).

The device can support up to 256 readers and electronic locks, as well as monitor hundreds of zones and alarms.

Cloud links let your contacts track or post your communications on several leading social media sites. You can include cloud links in documents, templates, snippets, mailings, campaigns, surveys, and survey invitation messages.

By default, OSDP readers are enrolled in an unencrypted state. Enabling secure pairing increases access-point security. OSDP readers in transparent mode require you to store the keys on your Synergis™ Cloud Link unit, or on secure access module (SAM) cards if you have the Synergis Cloud Link 312 model.

DIP switch uses

However, they're still fairly commonplace in a wide range of industrial applications and test circuits. This is because manual DIP switches offer an extremely cost-effective option for device control, and one that's also very easy to wire into an existing PCB or breadboard circuit design model.

The dip switches essentially act as a code that tells the receiver which remote control to respond to. Despite their limitations, dip switches remain a reliable method of communication between electronic devices. Because the code is manually set, it is less susceptible to interference from other devices.

What is the purpose of a DIP switch? ›

DIP switch refers to a set of electrical switches packaged in a small box or housing, which are arranged in a line or circle (rotary DIP). The function is to provide a range of electrical inputs to an electronic device based on the position of the individual switches within the line or circle.

Access https://localhost:8443 or use the port you've defined. Use the predefined User Name “Administrator” and Password “manage” and then click Logon, as shown in the figure below.

The default username and password are admin and softwire.

Expert-Verified Answer

The default admin user should have no password.